23.5 t
Pilna masa
280 kW
Nominālā jauda
28 t
Nominālā slodze
Tehniskā informācija
Tehniskā informācija
| Heaped (SAE 2:1) | 17.5 m³ |
|---|---|
| Struck | 13.9 m³ |
| Tailgate Heaped SAE 2:1 | 18.8 m³ |
| Tailgate Struck | 14.6 m³ |
| Raise Time | 12 s |
|---|---|
| Lower Time | 8 s |
| Type | High strength Brinell HB450 wear resistant steel |
|---|
| Front Plate | 7 mm |
|---|---|
| Base Plate | 13 mm |
| Side Plates | 11 mm |
| Engine Model | Cat® C13B |
|---|---|
| Gross Power (SAE J1995) | 280 kW |
| Net Power (SAE J1349) | 274 kW |
| Engine Power (ISO 14396) | 276 kW |
| Bore | 130 mm |
| Stroke | 157 mm |
| Displacement | 12.5 l |
| Note (1) | Advertised power is tested per the specified standard in effect at the time of manufacture. |
| Note (2) | Advertised power is tested at 1,800 rpm. |
| Note (3) | Net power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler, and fan at minimum speed. |
| Note (4) | Net power when the fan is at maximum speed is 274 kW (367 hp) per the SAE reference conditions. |
| Note (5) | Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014, and Korea Stage V emission standards. |
| Note (6) | Diesel exhaust fluid (DEF) used in Cat SCR systems must meet the requirements outlined in ISO 22241-1:2006. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certifications. |
| No Engine De-rating Below | 3810 m |
| Peak Engine Torque Gross (SAE J1995) | 2141 N·m |
| Peak Engine Torque Net (SAE J1349) | 2107 N·m |
| Peak Engine Torque Speed | 1200 r/min |
| Front Axle - Empty | 14360 kg |
|---|---|
| Center Axle - Empty | 4690 kg |
| Rear Axle - Empty | 4460 kg |
| Total - Empty | 23510 kg |
| Front Axle - Rated Load | 3250 kg |
| Center Axle - Rated Load | 12375 kg |
| Rear Axle - Rated Load | 12375 kg |
| Total - Rated Load | 28000 kg |
| Front Axle - Loaded | 17610 kg |
| Center Axle - Loaded | 17065 kg |
| Rear Axle - Loaded | 16835 kg |
| Total - Loaded | 51510 kg |
| Hydraulic Excavators: 350/352 - Passes | 5-Apr |
|---|---|
| Hydraulic Excavators: 336 - Passes | 6-May |
| Wheel Loaders: 972/972 XE - Passes | 4-Mar |
| Wheel Loaders: 966/966 XE - Passes | 4 |
| Wheel Loader: 962 - Passes | 5-Apr |
| Wheel Loader: 950 - Passes | 5 |
| Note | An optimum system match gives you a major productivity advantage. The 730 is an excellent match for the Cat 350/352 and 336 Hydraulic Excavators and Cat 972, 966, 962, and 950 Wheel Loaders. Having matched loading and hauling tools results in increased production and lower system costs per unit of volume moved. |
| Fuel Tank | 400 l |
|---|---|
| DEF Tank | 34 l |
| Cooling System | 83 l |
| Hydraulic System | 123 l |
| Engine Crankcase | 43 l |
| Transmission | 47 l |
| Final Drives/Differential | 125 l |
| Output Transfer Gear Box | 25 l |
| Note (1) | The declared dynamic operator sound pressure level is 70 +/- 1 when ISO 6396:2008 is used to measure the value for an enclosed cab. The measurement was conducted at 70% of the cooling fan’s maximum speed. The sound level may vary at different cooling fan speeds. The measurement was conducted with the cab doors and the cab windows closed. The cab was properly installed and maintained. |
|---|---|
| Note (2) | Hearing protection may be needed when operating with an open operator station and cab or when not properly maintained or with doors/windows open for extended periods or in noisy environments. |
| Brakes | ISO 3450:2011 |
|---|---|
| Cab - FOPS | ISO 3449:2005 Level II |
| Cab - ROPS | ISO 3471:2008 |
| Steering | ISO 5010:2019 |
| Lock to Lock | 4.75 seconds @ 60 rpm |
|---|
| Forward - 1 | 8 km/h |
|---|---|
| Forward - 2 | 15 km/h |
| Forward - 3 | 22 km/h |
| Forward - 4 | 34 km/h |
| Forward - 5 | 47 km/h |
| Forward - 6 | 55 km/h |
| Reverse - 1 | 9 km/h |
| Turning Dimensions - Steer Angle - Left/Right | 45° |
|---|---|
| Turning Dimensions - SAE Turning Radius | 7470 mm |
| Turning Dimensions - Clearance Radius | 8075 mm |
| Turning Dimensions - Inside Radius | 3879 mm |
| Turning Dimensions - Aisle Width | 5332 mm |
| Note | Dimensions are for machines equipped with 23.5R25 tires. |
| Rated Payload | 28 t |
|---|
