Tehnika Cat 319-07

EKSKAVATORI

Cat 319-07

Jutīga hidraulika nodrošina īsākos cikla laikus
Maksimāls izlaušanās un celšanas spēks
Nepārspējams kabīnes komforts ar lielisku redzamību
Nepārspējama piekļuve apkopei un apkopei
V posma dzinējs ar daļiņu filtru
Dzinēja izslēgšanas un tukšgaitas pārvaldība
Maksimāla materiālu apstrāde ar minimālu dīzeļdegvielas patēriņu

Saņemt piedāvājumu

Lietoti Ekskavatori

20 t

Pilna masa

99 kW

Nominālā jauda

1 m³

Kausa tilpums

Tehniskā informācija

Tehniskā informācija

Air Conditioning	The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. If equipped with R134a (Global Warming Potential = 1430), the system contains 0.8 kg (1.8 lb) of refrigerant which has a CO2 equivalent of 1.144 metric tonnes (1.261 tons). If equipped with R1234yf (Global Warming Potential = 0.5), the system contains 0.7 kg (1.5 lb) of refrigerant which has a CO2 equivalent of 0.001 metric tonnes (0.001 tons).

Boom	Reach 5.1 m (16'9")
Stick	Reach 3.1 m (10'2")
Bucket	GD 1.0 m³ (1.31 yd³)
Shipping Height - Top of Cab	2940 mm
Handrail Height	2990 mm
Shipping Length	8120 mm
Shipping Length - with Blade	8660 mm
Tail Swing Radius	1750 mm
Counterweight Clearance	1016 mm
Ground Clearance	463 mm
Track Length	4070 mm
Length to Center of Rollers	3265 mm
Track Gauge	2200 mm
Transport Width	2900 mm

Net Power - ISO 9249	99 kW
Net Power - ISO 9249 (DIN)	134 hp (metric)
Engine Model	Cat C3.6
Engine Power - ISO 14396	100 kW
Engine Power - ISO 14396 (DIN)	136 hp (metric)
Bore	98 mm
Stroke	120 mm
Displacement	3.6 l
Biodiesel Capability	Up to B20¹
Emissions	Meets U.S. EPA Tier 4 Final and EU Stage V emission standards.
Note (1)	Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator with engine speed at 2,200 rpm. Advertised power is tested per the specified standard in effect at the time of manufacture.
Note (2)	¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) and are compatible* with ULSD blended with the following lower-carbon intensity fuels up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels. Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations“ (SEBU6250) for details. While Caterpillar engines are compatible with these alternative fuels, some regions may not allow their use. Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels. **Engines with no aftertreatment devices are compatible with higher blends, up to 100% biodiesel (for use of blends higher than 20% biodiesel, consult your Cat dealer).

Maximum Digging Depth	6550 mm
Boom	Reach 5.1 m (16'9")
Stick	Reach 3.1 m (10'2")
Bucket	GD 1.0 m³ (1.31 yd³)
Maximum Reach at Ground Level	9190 mm
Maximum Cutting Height	9050 mm
Maximum Loading Height	6430 mm
Minimum Loading Height	1850 mm
Maximum Depth Cut for 2440 mm (8 ft) Level Bottom	6330 mm
Maximum Vertical Wall Digging Depth	5210 mm
Minimum Working Equipment Radius	2930 mm
Bucket Digging Force - ISO	123 kN
Stick Digging Force - ISO	71 kN

Jautājumi?
Mūsu komanda ir gatava jums palīdzēt.

Ir nepieciešama konsultāciju vai vēlaties uzdot jautājumu?
Lūdzam sazināties ar mums.