140 GC

OVERVIEW
—

The new Cat® 140 GC motor grader combines performance with cost efficient owning and operating. Servicing the machine is easy with grouped filter locations. Comfort options, including a heating/cooling system or air suspension seat, keep you productive throughout the day.

LOW COST-PER-HOUR OPERATION

EXTENDED MAINTENANCE CYCLES AND DEMAND FAN KEEP YOUR OVERALL COSTS DOWN.

CAB DESIGNED FOR COMFORT

BOOST PRODUCTIVITY AND EFFICIENCY WITH CAB COMFORT OPTIONS.

PERFORMANCE YOU NEED

GET PRECISE, CONSISTENT BLADE MOVEMENT WITH THE CAT C7.1 ENGINE, HYDRAULIC SYSTEM, AND CONTROLS.

PRODUCT SPECIFICATIONS FOR CAT 140 GC

—

Net Power Range (Tier 3)	131 kW
Displacement	7.01 l
Bore	105 mm
Stroke	135 mm
Engine Model	Cat 7.1
Note (1)	Net power advertised is the power available at rated speed of 2,200 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator.
Maximum Torque - ISO 9249	889 N·m
Standard Capability	43 °C
Note (4)	The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2 kg of refrigerant which has a CO2 equivalent of 2.86 metric tonnes.
Derating Altitude	4500 m
Number of Cylinders	6
Emissions	U.S. EPA Tier 3/EU Stage IIIA
Note (3)	Power as declared per ISO 14396
Note (2)	Net power advertised is the power available at rated speed of 2,200 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator.
Torque Rise - ISO 9294	40%
Engine RPM	2,200

Weight*	17390 kg
Note	Typically equipped operating weight is calculated with full fuel tank, coolant, lubricants, operator, push block, ROPS closed cab, rear ripper/scarifier, 4.3 m (14 ft) blade, 17.5-25 MP tires on multi-piece rims and other equipment.

Blade Width	3.7 m
Throat Clearance	112 mm
Blade Height	509 mm
End Bit	152 mm
Cutting Edge Width	152 mm
Arc Radius	413 mm

Circle Drive without Slip Clutch	1.5 l
Circle Drive with Slip Clutch	7.5 l
Transmission	18 l
Cooling System	10.6 gal (US)
Hydraulic System	45 l
Fuel Tank	297 l
Engine Crankcase	21 l

Moldboard Side Shift Left	663 mm
Maximum Depth of Cut	735 mm
Moldboard Side Shift Right	512 mm
Maximum Shoulder Reach Right	1928 mm
Maximum Lift Above Ground	480 mm
Circle Center Shift Left	752 mm
Maximum Shoulder Reach Left	1764 mm
Blade Tip Range Backward	5
Circle Center Shift Right	728 mm
Blade Tip Range Forward	40

Width	2428 mm
Maximum Height	3839 mm
Length of Machine*	10322 mm
Note	*Typically equipped with push block and ripper.

Note

The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430).The system contains 2 kg of refrigerant which has a CO2 equivalent of 2.86 metric tonnes.The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430).The system contains 2 kg of refrigerant which has a CO2 equivalent of 2.86 metric tonnes.